New dark bronze aluminum double swing gate hung between two stone columns at the end of a curved driveway.

San Antonio Automatic Gates: Driveway Gate Installation in San Antonio, TX

San Antonio Automatic Gates does driveway gate installation in San Antonio, TX. We build and hang swing and slide driveway gates in steel, aluminum, wrought iron style, and wood. Every gate goes on posts or columns set to carry its weight, and every gate is built ready for an opener, even if you add the opener later.

Monday to Saturday, 7:00 AM to 7:00 PM

Get a Free Gate Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

What goes into a driveway gate installation?

A driveway gate has three parts that all have to work together: the gate, what it hangs on or rolls along, and the ground under it. Most gate problems we see trace back to one of those three, not the opener.

  1. Measure the opening, the slope of the drive, and the space beside or behind the gate.
  2. Pick the gate type: single swing, double swing, or slide.
  3. Pick the material and design.
  4. Set posts or build columns, with footings sized for the gate.
  5. Hang the gate on heavy hinges, or set the track or rollers for a slide gate.
  6. Check that the gate moves freely and stays level through its full travel.
  7. Add the opener now, or leave the gate prepped for one later.

Swing, double swing, or slide?

Driveway gate types
TypeHow it worksGood fit when
Single swingOne panel hinged on one postThe opening is on the narrower side and there's room for the panel to swing
Double swingTwo panels that meet in the middleThe opening is wide and you want the panels shorter and lighter
SlideOne panel rolls along the fence lineThe drive slopes up, the gate is close to the street, or there's no room to swing

Swinging gates usually open into the property, away from the street. If your driveway rises behind the gate, a swing gate may scrape the ground. A slide gate needs open space along the fence about as long as the gate itself. See our swing gate vs. slide gate guide for more.

What materials work best here?

Driveway gate materials
MaterialWhat to know
SteelStrong and heavy. Needs a good powder coat or paint to fight rust. Common for wrought iron style designs.
AluminumLighter, won't rust, easier on openers. Less strong than steel against a hit.
WoodWarm look that fits Hill Country homes. Needs a steel frame to stay square, and regular sealing in the sun.
Steel frame with wood or panel infillStrength of steel with the look of wood or a solid privacy face.

San Antonio sun is tough on wood and paint. A wood gate that faces west takes a beating every afternoon. We use steel frames inside wood gates to keep them from sagging, and we recommend finishes made for full sun. If you want a one-of-a-kind look, see custom gate design.

Why do posts and columns matter so much?

A gate is a long lever. All that weight hangs off the hinge side, and every open and close pulls on the post. A post that leans even a little makes the gate sag, drag, and wear out the opener.

We size posts and footings for the gate's weight and length. For masonry or stone columns, the gate side needs a steel post or a solid core inside the column, not just a hinge bolted to the stone. Ground around San Antonio ranges from rocky limestone in the Hill Country to clay soils that swell when wet and shrink when dry. We dig deep enough and pour enough concrete for the ground we hit.

Do you need a permit for a driveway gate in San Antonio?

Usually. A driveway gate is part of a fence line, and the City of San Antonio treats new fences as permitted work.

The City of San Antonio's fence fact sheet says a permit is needed to build or repair more than 25% of a fence. In a residential front yard, it lists the height limit as 3 feet for a solid fence or 5 feet for a fence that's combined privacy or predominantly open.

Source: City of San Antonio Development Services, Fences fact sheet

That front yard height limit matters if you want a tall gate near the street. The same fact sheet says corner lots have a sight triangle, measured 25 feet each way, where no fence can block the view of traffic. Gate rules are different in nearby cities like Helotes, Alamo Heights, and Shavano Park, and HOAs often have their own design rules. We check what applies before we build.

How far back should the gate sit?

Far enough that a car can pull off the street while the gate opens. If the gate sits right at the curb, cars wait in the road. Some cities set a minimum distance. Helotes, for example, requires access control gates that abut a public right-of-way to be set back at least 20 feet from the property line. Even where there's no rule, we try to give you room for at least one car to wait off the street.

Can you add the opener later?

Yes. We build and hang the gate ready for automation: a solid frame, hinges or rollers rated for powered use, a mounting spot for the opener, and a conduit path for power. When you're ready, the gate opener installation goes fast. Many people just do both at once and add access control like a keypad or remote.

Driveway gate installation FAQs

It depends on the gate. Setting posts in concrete adds time, since the concrete needs to cure before the gate goes on. Custom gates also need build time before install.

Ready for a new driveway gate?

Call or send a few details and photos. We'll measure and give you a written price.

Get a Free Gate Quote

By submitting, you agree to our Privacy Policy and Terms of Service.

Call NowFree Quote