
San Antonio Automatic Gates: Gate Opener Repair in San Antonio, TX
San Antonio Automatic Gates does gate opener repair in San Antonio, TX. If your gate hums but won't move, stops halfway, opens but won't close, or ignores the remote, we track down why and fix it. We work on swing and slide openers, solar systems, keypads, sensors, and control boards across most major brands.
Monday to Saturday, 7:00 AM to 7:00 PM
Get a Free Gate Quote
What are the most common gate opener problems?
Most openers that quit aren't dead. Something smaller stopped them, and the opener is doing what it's supposed to do when a part fails.
| What the gate is doing | Likely causes |
|---|---|
| Won't move at all | Dead battery, tripped breaker, blown fuse, bad transformer, or power loss |
| Hums but won't move | Bad motor capacitor, stuck gearbox, or a gate that's binding |
| Opens but won't close | Blocked or misaligned photo eyes, a stuck safety edge, or a bad exit sensor |
| Stops and reverses | Gate dragging, a sensor tripping, or the force setting too low for the gate |
| Stops halfway | Low battery, limits out of adjustment, or a binding hinge or roller |
| Remote won't work | Dead remote battery, lost programming, or a bad receiver |
| Keypad won't work | Bad keypad, wiring damage, or a code issue |
| Works some days, not others | Weak battery, loose wire, or water in the control box |
If you want to check a few things yourself first, our guide to why your gate opener stopped working walks through it.
How do we fix it?
- Ask what the gate is doing and when it started.
- Release the gate and move it by hand. If it drags or binds, the opener isn't the problem.
- Check power: breaker, transformer, battery, and solar panel if there is one.
- Check safety devices: photo eyes, edges, and loops.
- Check the control board for error codes or burnt parts.
- Check the arms, gears, chain, or rack for wear.
- Fix the cause and test the gate through several full cycles.
Why do openers fail around San Antonio?
Heat, storms, and dust take a toll. Control boxes sit in the sun all summer. Batteries wear out faster in heat. Lightning and power surges can fry control boards. Rain finds its way into boxes that weren't sealed right. Fire ants love warm control boxes and can short out a board. Gates that sag over time drag and make the opener work too hard until it trips.
Long power outages take a toll too. Openers with a weak or dead backup battery stop when the power goes, and some boards don't come back right on their own.
What does gate opener repair cost?
It depends on what failed. A dead battery or a misaligned sensor costs far less than a new motor or board.
Angi puts the average automatic gate repair at about $900, with most repairs between $550 and $1,500. It lists sensor repairs at $100 to $1,250, remote or keypad fixes at $75 to $300, and motor repairs from $300 to $4,750.
Source: Angi, Automatic Gate Repair Cost
Those are national numbers, not our prices We tell you what's wrong and what it costs before we fix it.
Repair or replace?
Sometimes repairing an old opener isn't worth it. We'll tell you when replacement makes more sense, like when:
- Parts for the opener are no longer made
- The opener is too small for the gate and keeps failing
- The motor and board have both failed
- The opener can't connect to modern safety sensors
- You're adding solar and the old opener can't run on it
If it's time for a new one, see gate opener installation.
Do you fix keypads, remotes, and intercoms?
Yes. Lost remotes, a keypad that stopped taking codes, a call box that won't ring, or an exit sensor that opens the gate for no reason are all part of gate repair. Sometimes the fix is a new part. Sometimes it's an upgrade to better access control.
What can you check before you call?
A few quick checks can save a service call:
- Look at the breaker or outlet that powers the gate. Reset it if it tripped.
- Wipe the photo eye lenses and make sure nothing is between them, like a plant, a trash can, or a spider web.
- Replace the battery in your remote.
- Look for a blinking light or error code on the control board and write it down.
- Release the gate and move it by hand. If it's hard to move, the problem is the gate, not the opener.
- On a solar gate, check the panel for dirt or new shade.
If none of that fixes it, call us and tell us what you found, It helps us bring the right parts.
Can you help after a storm or power outage?
Yes. Storms and outages are some of our busiest repair times. Lightning can damage control boards and keypads. A long outage can drain the backup battery, Flooding can soak boxes and loops. If your gate won't work after a storm, use the manual release to open it, leave it open if you need to, and call us. We'll check for damage, replace what failed, and add surge protection where it makes sense.